Microcontrollers & Embedded System Designs

Hi PauloSilva,

I am working on the similar project, you specified that your Nokia 6100 works very well on Hyperterminal. Please Let me know did you used a serial COM cable to connect the Mobile to PC. i would like to know do we require any drivers need to be installed in PC. If i directly connect mobile with PC through the COM cable will it reply for the AT Commands. Please let me know.

Thank you.

Hi Chakkarapani,

I used a DKU-5 cable.....this cable is connected to USB port and the cable´s driver is required. If you discover some news, please contact me, ok??

thanks

Hi Abicash, how are you??

How did you test your project??...Is there some way of to test the FBUS commands through PC and to analyze the answers sent of the cellular?? I´m trying install Gnokii, did you use it??

thanks

Hi Paulo,
I am using DLR3 COM cable (DB9 end). I installed the cable driver. In Logo Manager my phone is getting detected. But when i am trying through Hyperterminal it is not connecting. And it is not responding for the AT Commands.

Please say me the connection settings in the Hyperterminal?
I am using Nokia 6210 and i am sure it supports AT Commands. I am unable to find the fault. Please help me.

Thanks.

In hyperterminal I used the default setting.... 9600bps, one bit stop, no parity, no flow control.