Forum
=> Not registered yet?You can enter queries here.
Forum - Connection settings for PC - Mobile
You are here: Forum => FBUS Tutorial => Connection settings for PC - Mobile |
|
abicash (24 posts so far) |
Ok I have found something more This pinout for your fone and check speed for fbus So it wont be operative for anything less than 230.4kBps Pin Description 1 VIN CHARGER INPUT VOLTAGE 8.4V 0.8A 2 CHRG CTRL CHARGER CONTROL PWM 32Khz 3 XMIC MIC INPUT 60mV - 1V (also Device Selector) 4 SGND SIGNAL GROUND (also DLR-3 Vcc?) 5 XEAR EAR OUTPUT 80mV - 1V (also DLR-3 RTS) 6 MBUS 9600 B/S 7 FBUS_RX 9.6 - 230.4 KB/S 8 FBUS_TX 9.6 - 230.4 KB/S 9 L_GND CHARGER / LOGIC GND | |||
Russel (3 posts so far) |
Please tell me how to make call, terminate call by using f-bus protocol & their content.Say i want to dial call to 01914661719 | |||
Sanu (4 posts so far) |
Hi, Im using Nokia 3310 and a self made F bus cable .... The problem im facing is that...It cant be synchronised with the PC. But Logomanager works fine with this... After starting Logmanager,when Terminal is connected,the phone sends all events it received (i.e - miss call and messages). The SMS it received is correct to my knowledge...when i decode the SMS i got the SMS i sent to the phone (On). Just the problem is the phone can't receives commands from the Terminal.... in a sencs it is one sided...,phone data are coming to the PC but the phone cant receive the data from Terminal. But without starting Logomanager once,the phone nither sends data to the terminal nor receive commands from terminal...... Can it will work fine when i'll replace the terminal with a Microcontroller... Im first testing the operation in Terminal just to know the whole process happened....by replacing the terminal wth a mC i cant be able to understand the whole thing happened inside.... PLZ..plz..plz....... Plz help me....i have to submit my Final project after one month.... Thanks in Advance...... |
Total topics: 14
Total posts: 87
Total users: 188
Online now (registered users): Nobody